Lighting Control
Award-Winning Smart Room Control Solutions
Trinity Automated Solutions provides Smart Room Control Solutions that operated as an end-to-end system for the control of HVAC room terminal equipment, Lighting, and Shades/Sunblind, achieving the highest levels of comfort for occupants while increasing operating cost savings, from installation time and wiring/material requirements to energy consumption.
It is a unique, modular solution designed for local or room applications, such as offices, patient rooms, dorms, military housing, etc.
Unified Solutions for Increased ROI:
The Smart Room Control Solution delivers energy savings in excess of 30% on HVAC and 60% on lighting, resulting in the lowest total cost of ownership via unified control with only one product configured.
Lowest Total Cost of Ownership
- Only one product configured
- Simplifies design, reduces installation time and costs, improves maintenance and serviceability, and increases reliability of multi-application integration
Energy Savings Delivered
- Using unified occupancy-based control strategies, daylight harvesting based on light level sensing and natural light optimization
- The automation of shades/sunblind increases the insulation factor of windows
Innovative ECO-Vue™ Leaf Pattern
- Available on the Allure EC-Smart-Vue and myPERSONIFY mobile app
- Graphically indicates energy consumption in real-time and encourages occupants’ energy-conscious behavior.
Products & Models
The ECx-Light Expansion Modules are microprocessor-based interfaces that extend the number of inputs and outputs provided by the ECL/ECB-PTU Series controllers as well as ECY/ECL/ECB-VAV controllers.
Features:
- Part of an extensive range of lighting and shade / sunblind expansion modules that enables smart cross-management of HVAC, lighting, and shades / sunblinds as a whole, creating a unique Smart Room Control Solution.
- The main HVAC controller and its associated expansion modules form a single device on the network that reduces network traffic and facilitates BMS integration.
- Seen as an extension of the main HVAC controller when configuring, allowing you to save engineering time.
- Quick-link connectors for direct installation into the ceilings, or traditional detachable connectors for use with optional strain reliefs and terminal block covers. This may eliminate the need for a protective enclosure in some jurisdiction.
- Integrated digital inputs to interface with light switches, window contacts, etc...
- Separate power supply for loads and internal electronics allows for dedicated metering, leading to more accurate energy consumption analysis
- Fail-safe mode to comply with most regulation requirements
Features:
- Unique DALI broadcast technology, eliminating the need for DALI addressing and commissioning for fast and easy integration.
- Complete disconnection from mains (ballast power supply and DALI buses) when all DALI commands are off allows for further energy savings
- Smart management of DALI buses (runhours counter, lamp failure detection, ...) saves maintenance times and costs.
- Only one connector per DALI output (ballast power supply and DALI buses) reduces installation and wiring costs while reducing the risks of errors.
- Fail-safe mode to comply with most regulation requirements.
- Embedded power supply eliminates the need for an external power supply to power the controlled device, minimizing installation time and cost.
- Same wiring architecture as the ECx-Light-4D expansion modules, to convert easily 1-10V dimming lighting projects into DALI lighting projects
- A wide range of lighting and shade / sunblind expansion modules that enables smart cross-management of HVAC, lighting and shades / sunblinds as a whole, creating a unique Smart Room Control solution.
- The main HVAC controller and its associated expansion modules form a single device on the network that reduces network traffic and facilitates BMS integration.
- Seen as an extension of the main HVAC controller when configuring, allowing you to save engineering time.
- Quick-link connectors for direct installation into the ceilings, or traditional detachable connectors for use with optional strain reliefs and terminal block covers. This may eliminate the need for a protective enclosure in some jurisdictions.
- Integrated digital inputs to interface with light switches, window contacts, etc...
- Control tuneable white and RGB light fixtures with an easy to use configuration block in EC-gfxProgram.
Features:
- A wide-range of lighting and shade / sunblind expansion modules that enables smart cross-management of HVAC, lighting and shades / sunblinds as a whole, creating a unique Smart Room Control solution.
- The main HVAC controller and its associated expansion modules form a single device on the network that reduces network traffic and facilitates BMS integration.
- Seen as an extension of the main HVAC controller when configuring, allowing you to save engineering time.
- Quick-link connectors for direct installation into the ceilings, or traditional detachable connectors for use with optional strain reliefs and terminal block covers. This may eliminate the need for a protective enclosure in some jurisdictions.
- Integrated digital inputs to interface with shade / sunblind switches, window contacts, etc...
- Fail-safe mode to comply with most regulation requirements.
- The ECx-Blind-4 has a separate power supply allowing for dedicated metering leading to more accurate energy consumption analysis.
- The ECx-Blind-4LV models have an embedded power supply that can eliminate the need for an external power supply to power the controlled device.
Lighting and Sunblind Control
For maximized occupant wellbeing and efficiency, optimal lighting should be delivered at the right place and at the right time. Trinity Automated Solutions' lighting control platform, Distech Controls', can be unified with your BMS system while still allowing you to design your lighting environment exactly as you like.
Our unique, modular solution is designed for local or room applications, such as offices, open spaces, patient rooms, dorms and military housing.
Our Smart Room Control solution to the EC-Light relay panels, can reduce lighting energy usage by up to an estimated 70% via a multitude of energy saving control techniques.
Ideal for Office Building, Small retail or K12 application. Combined AHU and mechanical equipment control with the power of the nLight to create a unique Unified solution. It is modular and scalable to effectively address any HVAC combined with lighting application for up to 48 points IO points and 300 lighting devices.
Features:
- Customize your ECLYPSE Connected System Controller, by selecting from:
- 2 power supplies
- 1 control, automation and connectivity servers
- 12 I/O modules - can be combined together for up 48 IO points
- Communication/integration options
- In daisy-chain wired IP, supports STP loop-free topology configuration
- Proven high-performance and power efficient single core-processor, providing scalable speed (above 1GHZ) for accelerated reading and control of points, and enhanced trending capabilities
- Enables Modbus RTU integration
- Cost effectively connect meters, VFDs and other Modbus devices without additional gateways
- Daisy-chain up to 12 Allure™ series communicating sensors via the dedicated subnet port
- Direct connection to EC-gfxProgram, graphical programming interface, and mobile apps
- Embedded with ENVYSION, web-based graphic design and visualization interface, for hosting of system-based graphics, and visualization of HVAC and lighting resources as well as schedules, alarms, and trend logs directly from the controller
- Auto-addressing eliminates the need to manually assign an address to each I/O module reducing installation and configuration time
- All modules are plug & play devices, equipped with HD-15 connectors transmitting power and communications, for fast and easy assembly
- Hot-swappable tool-less design and unique latching mechanism
